• Low Pressure Electric Steam Generator

    Standard Features:

    • With the exception of our hawk series, all of our steam generators are built by an ASME Certificate holder in accordance with ASME BPVC Section I – Rules for Construction of Power Boilers (“ASME BPVC Section I”).  They also comply with the requirements outlined in The National Board Synopsis of Boiler and Pressure Vessel Laws, Rules and Regulations (NB-370) RULES FOR CONSTRUCTION AND STAMPING section, which for many jurisdictions include but are not limited to ASME BPVC Section I, ASME CSD-1, ASME B31.1, and REGISTRATION WITH THE NATIONAL BOARD.
    • ASME CSD-1 Compliant
    • High Pressure Safety Reset
    • UL Listed and labeled under UL 834
    • Dual Pressure Controls (UL 353)
    • Low Level Cut-Off (LLCO) (UL 353)
    • Safety Relief Valve possessing the ASME V Mark (these valves are built by a manufacturer holding a valid ASME Certificate of Authorization)

    Recommended Options (Non-Standard)
    • Spare Parts Package
    • Motorized Automatic Flush and Drain (MAFD)

  • LG 10-40 Electric Steam Generators

    Standard Features:

    • With the exception of our hawk series, all of our steam generators are built by an ASME Certificate holder in accordance with ASME BPVC Section I – Rules for Construction of Power Boilers (“ASME BPVC Section I”).  They also comply with the requirements outlined in The National Board Synopsis of Boiler and Pressure Vessel Laws, Rules and Regulations (NB-370) RULES FOR CONSTRUCTION AND STAMPING section, which for many jurisdictions include but are not limited to ASME BPVC Section I, ASME CSD-1, ASME B31.1, and REGISTRATION WITH THE NATIONAL BOARD.
    • High Pressure Safety Reset
    • UL Listed and labeled under UL 834
    • Dual Pressure Controls (UL 353)
    • Low Level Cut-Off (LLCO) (UL 353)
    • Safety Relief Valve possessing the ASME V Mark (these valves are built by a manufacturer holding a valid ASME Certificate of Authorization)

    Recommended Options (Non-Standard):
    • Spare Parts Package
    • Motorized Automatic Flush & Drain (MAFD)
    • Single Service Transformer
    • 5-Micron Water Filter

  • V-BLOCK Electric Steam Generators

    V-Block Model

    Standard Features:

    • With the exception of our hawk series, all of our steam generators are built by an ASME Certificate holder in accordance with ASME BPVC Section I – Rules for Construction of Power Boilers (“ASME BPVC Section I”).  They also comply with the requirements outlined in The National Board Synopsis of Boiler and Pressure Vessel Laws, Rules and Regulations (NB-370) RULES FOR CONSTRUCTION AND STAMPING section, which for many jurisdictions include but are not limited to ASME BPVC Section I, ASME CSD-1, ASME B31.1, and REGISTRATION WITH THE NATIONAL BOARD.
    • ASME CSD-1 Compliant
    • High Pressure Safety Reset
    • UL Listed and labeled under UL 834
    • Dual Pressure Controls (UL 353)
    • Low Level Cut-Off (LLCO) (UL 353)
    • Safety Relief Valve possessing the ASME V Mark (these valves are built by a manufacturer holding a valid ASME Certificate of Authorization)
    Recommended Options (Non-Standard):
    • Spare Parts Package
    • Motorized Automatic Flush and Drain (MAFD)

  • Electric Steam Generators

    Standard Features:

    • With the exception of our hawk series, all of our steam generators are built by an ASME Certificate holder in accordance with ASME BPVC Section I – Rules for Construction of Power Boilers (“ASME BPVC Section I”).  They also comply with the requirements outlined in The National Board Synopsis of Boiler and Pressure Vessel Laws, Rules and Regulations (NB-370) RULES FOR CONSTRUCTION AND STAMPING section, which for many jurisdictions include but are not limited to ASME BPVC Section I, ASME CSD-1, ASME B31.1, and REGISTRATION WITH THE NATIONAL BOARD.
    • High Pressure Safety Reset
    • UL Listed and labeled under UL 834
    • Dual Pressure Controls (UL 353)
    • Low Level Cut-Off (LLCO) (UL 353)
    • Safety Relief Valve possessing the ASME V Mark (these valves are built by a manufacturer holding a valid ASME Certificate of Authorization

  • LB 100-240 Electric Steam Generators

    Standard Features:

    • With the exception of our hawk series, all of our steam generators are built by an ASME Certificate holder in accordance with ASME BPVC Section I – Rules for Construction of Power Boilers (“ASME BPVC Section I”).  They also comply with the requirements outlined in The National Board Synopsis of Boiler and Pressure Vessel Laws, Rules and Regulations (NB-370) RULES FOR CONSTRUCTION AND STAMPING section, which for many jurisdictions include but are not limited to ASME BPVC Section I, ASME CSD-1, ASME B31.1, and REGISTRATION WITH THE NATIONAL BOARD.
    • Dual Pressure Controls (UL 353)
    • Low Level Cut-Off (LLCO) (UL 353)
    • Safety Relief Valve possessing the ASME V Mark (these valves are built by a manufacturer holding a valid ASME Certificate of Authorization)

    Recommended Options (Non-Standard):
    • Spare Parts Package
    • Motorized Automatic Flush & Drain (MAFD)
    • Single Service Transformer
    • 5-Micron Water Filter

  • LB 80 Electric Steam Generators

    Standard Features:

    • With the exception of our hawk series, all of our steam generators are built by an ASME Certificate holder in accordance with ASME BPVC Section I – Rules for Construction of Power Boilers (“ASME BPVC Section I”).  They also comply with the requirements outlined in The National Board Synopsis of Boiler and Pressure Vessel Laws, Rules and Regulations (NB-370) RULES FOR CONSTRUCTION AND STAMPING section, which for many jurisdictions include but are not limited to ASME BPVC Section I, ASME CSD-1, ASME B31.1, and REGISTRATION WITH THE NATIONAL BOARD.
    • Dual Pressure Controls (UL 353)
    • Low Level Cut-Off (LLCO) (UL 353)
    • Safety Relief Valve possessing the ASME V Mark (these valves are built by a manufacturer holding a valid ASME Certificate of Authorization)

    Recommended Options (Non-Standard):
    • Spare Parts Package
    • Motorized Automatic Flush & Drain (MAFD)
    • Single Service Transformer
    • 5-Micron Water Filter

  • S.S. LG-XX (H) photo

    Standard Features:

    • 316L Stainless Steel on all Wetted Surfaces
    • With the exception of our hawk series, all of our steam generators are built by an ASME Certificate holder in accordance with ASME BPVC Section I – Rules for Construction of Power Boilers (“ASME BPVC Section I”).  They also comply with the requirements outlined in The National Board Synopsis of Boiler and Pressure Vessel Laws, Rules and Regulations (NB-370) RULES FOR CONSTRUCTION AND STAMPING section, which for many jurisdictions include but are not limited to ASME BPVC Section I, ASME CSD-1, ASME B31.1, and REGISTRATION WITH THE NATIONAL BOARD.
    • High Pressure Safety Reset
    • UL Listed and labeled under UL 834
    • Dual Pressure Controls (UL 353)
    • Low Level Cut-Off (LLCO)
    • Safety Relief Valve possessing the ASME V Mark (these valves are built by a manufacturer holding a valid ASME Certificate of Authorization).

    Recommended Options (Non-Standard)
    • Spare Parts Package
    • Single Service Transformer

  • S.S. LB 80 Electric Steam Generators

    Standard Features

    • 316L Stainless Steel on all Wetted Surfaces
    • With the exception of our hawk series, all of our steam generators are built by an ASME Certificate holder in accordance with ASME BPVC Section I – Rules for Construction of Power Boilers (“ASME BPVC Section I”).  They also comply with the requirements outlined in The National Board Synopsis of Boiler and Pressure Vessel Laws, Rules and Regulations (NB-370) RULES FOR CONSTRUCTION AND STAMPING section, which for many jurisdictions include but are not limited to ASME BPVC Section I, ASME CSD-1, ASME B31.1, and REGISTRATION WITH THE NATIONAL BOARD.
    • High Pressure Safety Reset
    • UL Listed and labeled under UL 834
    • Dual Pressure Controls (UL 353)
    • Low Level Cut-Off (LLCO)
    • Safety Relief Valve possessing the ASME V Mark (these valves are built by a manufacturer holding a valid ASME Certificate of Authorization).

    Recommended Options (Non-Standard)
    • Spare Parts Package
    • Single Service Transformer
    Click here to read the NB-370 synopsis.

  • S.S. LB 100-240 Electric Steam Generators

    Standard Features

    • 316L Stainless Steel on all Wetted Surfaces
    • With the exception of our hawk series, all of our steam generators are built by an ASME Certificate holder in accordance with ASME BPVC Section I – Rules for Construction of Power Boilers (“ASME BPVC Section I”).  They also comply with the requirements outlined in The National Board Synopsis of Boiler and Pressure Vessel Laws, Rules and Regulations (NB-370) RULES FOR CONSTRUCTION AND STAMPING section, which for many jurisdictions include but are not limited to ASME BPVC Section I, ASME CSD-1, ASME B31.1, and REGISTRATION WITH THE NATIONAL BOARD.
    • High Pressure Safety Reset
    • UL Listed and labeled under UL 834
    • Dual Pressure Controls (UL 353)
    • Low Level Cut-Off (LLCO)
    • Safety Relief Valve possessing the ASME V Mark (these valves are built by a manufacturer holding a valid ASME Certificate of Authorization).

    Recommended Options (Non-Standard)
    • Spare Parts Package
    • Single Service Transformer
    Click here to read the NB-370 synopsis.

  • S.S. LB 40-60 Electric Steam Generators

    Standard Features

    • 316L Stainless Steel on all Wetted Surfaces
    • With the exception of our hawk series, all of our steam generators are built by an ASME Certificate holder in accordance with ASME BPVC Section I – Rules for Construction of Power Boilers (“ASME BPVC Section I”).  They also comply with the requirements outlined in The National Board Synopsis of Boiler and Pressure Vessel Laws, Rules and Regulations (NB-370) RULES FOR CONSTRUCTION AND STAMPING section, which for many jurisdictions include but are not limited to ASME BPVC Section I, ASME CSD-1, ASME B31.1, and REGISTRATION WITH THE NATIONAL BOARD.
    • High Pressure Safety Reset
    • UL Listed and labeled under UL 834
    • Dual Pressure Controls (UL 353)
    • Low Level Cut-Off (LLCO)
    • Safety Relief Valve possessing the ASME V Mark (these valves are built by a manufacturer holding a valid ASME Certificate of Authorization).

    Recommended Options (Non-Standard)
    • Spare Parts Package
    • Single Service Transformer
    Click here to read the NB-370 synopsis.